When setting up Alerts in Amper, there are two methods of notification: text message and email.
Text message alerts will be sent from the number 441-54. If you have any spam protection it is important to make sure that these notifications are not wrongfully being filtered out. To make sure you are properly receiving the Alerts, adding a number to an Alert will send the following notice:
The text will display the name entered when configuring the Alert Recipient along with the name of the Alert. In this example we have added Chris Forte to an Alert for when a machine in the Haas cell is down for more than 15 minutes.
Once the Alert is sent you will receive a text message with the name of the Alert, along with any alert specific information. In this case we are notified of the machine that has gone down and the time the machine went down at.
If opting for email alerts, you will be sent an email from firstname.lastname@example.org. Add this email address to your contacts list to make sure the Alerts are not wrongfully sent to your Spam folder.
These Alerts will have the same context as the text messages, notifying you of the name of the Alert along with any Alert specific information.
Depending on the type of Alert you set up, you will receive a follow up email or text to tell you that the machine has exited an Alert state. For example, lets say you have the Alert for when "Machine A" is down for more than 45 minutes. Once "Machine A" goes down for 45 minutes, you will first receive the Alert informing you the machine is down. Then when the machine enters a Production state again, you will receive an resolution message informing you that Production has started again for "Machine A".